Icom GM600 User Manual

52
8
DSC OPERATION
■ Sending a Non-Distress calls (Continued)
D Sending a Group call
The Group call function allows you to
transmit a DSC signal to only a specic
group.
q Push [Compose Non-Distress]
to display the Compose Non-Distress
screen.
• To display the screen from the Menu
screen:
([MENU] > Compose Non-Distress )
w Select “Message Type,” then push
[ENT].
e Select “Group Call,” then push [ENT].
+
Push
Rotate
r Select “Address,” then push [ENT].
t Select the desired Group address
or “Manual Input,” then push [ENT].
(Example: GROUP1)
+
Push
Rotate
When you select “Manual Input” in
step t, push the keypad to manually
enter the desired Group ID. (p. 30)
y Select “Channel,” then push [ENT].
u Select the desired voice channel,
then push [ENT].
+
Push
Rotate
i Push [Call] to send the Group
call.
Push
o After sending, the following screen is
displayed.
!0 Hold down [PTT] to announce the
message.
!1 Push [Home]
to return to the
Main screen.

Icom GM600 Specifications

General

Brand	Icom
Model	GM600
Category	Transceiver
Language	English