To Next Page

To Previous Page

DSC OPERATION

q When a Polling Request call is received:

• An alarm sounds.

• The following screen is displayed.

• The backlight blinks when the BAM

function (p. 20) is OFF.

w Push any [Close] .

• When the BAM function (p. 20) is

OFF: Push any [Alarm OFF] .

e Select your desired action.

[Accept]:

Enters the DSC Task mode.

DSC Task mode

•

Rotate [CH/ENT] to view the call

contents, including the position data.

r Push [Home] to return to the

Main screen.

D Receiving a Polling Request call

[Hold]: Holds the RX call task,

and return to the previous

screen.

[Able]: Sends an acknowledgment.

[Accept]: Enters the DSC Task mode.

DSC Task mode

•

Rotate [CH/ENT] to view the call

contents.

r Push [Home] to return to the

Main screen.

NOTE: When “Polling ACK” is set to

“Auto,” the transceiver automatically

replies to the call. Both the TX and RX

calls are stored in the Transmitted and

Received Call Logs. (Default: Auto)

TIP: See page 55 for details of

sending an acknowledgment.

Icom GM600 User Manual

Other manuals for Icom GM600