Icom IC-2300H User Manual

Previous view
■ Reversed Duplex function
When the reversed duplex function is ON, the receive
frequency shifts. (The transmit frequency shifts in normal duplex
mode.) An example receive and transmit frequency is
shown in the table below with the following settings:
Input frequency : 145.30 MHz
Offset direction : – (Negative)
Offset frequency : 0.6 MHz
q Push [SET] to enter the Set mode.
w Push [SET] or [MONI] several times until “REV” ap-
pears.
e Rotate [DIAL] to turn the reversed duplex mode ON
or OFF.
r Push any key other than [SET] or [MONI], to save
the selection and exit the Set mode.
Using the HM-133V
z Push [SET] to enter the Set mode.
x Push [ SET ] or [ ENT ] until “REV” appears.
c Push [Y] or [Z] to turn the reversed duplex mode
ON or OFF.
v Push [CLR] to save the selection and exit the
Set mode.
■ Auto repeater
The USA version automatically activates the repeater
settings (DUP– or DUP+ and tone encoder ON/OFF), when the
operating frequency falls within the general repeater
output frequency range, and deactivates them when
outside of the range.
D Setting the Auto Repeater function ON/OFF
q Push [ ] to turn OFF power.
w While holding down [LOCK] (SET) , hold down [ ] to
turn ON the power and enter the Initial Set mode.
e Push [SET] until “RPT” appears as shown below.
r Rotate [DIAL] to turn the Auto Repeater function to
“R1,” “R2” or “OF.”
• “OF”: Auto repeater is OFF.
• “R1”: Auto repeater is ON, tone encoder is OFF.
• “R2”: Auto repeater is ON, tone encoder is ON.
t Push [ ] to exit the Initial Set mode.
Frequency range and offset direction D
Frequency range Duplex direction
145.200–145.495 MHz
“–” appears
146.610–146.995 MHz
147.000–147.395 MHz “+” appears
16
Reversed OFF ON
Rx frequency 145.30 MHz 144.70 MHz
Tx frequency 144.70 MHz 145.30 MHz
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
The reversed duplex mode: OFF The reversed duplex mode: ON
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push
to enter the Set mode.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Auto repeater function is
turned OFF.
Auto repeater function is ON,
tone encoder is ON.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
The duplex icon blinks while the Reversed Duplex function is turned ON.
4
REPEATER OPERATION
Only USA versions

Icom IC-2300H Specifications

General

Radio type	Portable
Supported radio bands	FM
RMS rated power	65 W
Display type	LCD
Backlight color	Amber/Yellow/Green
Built-in display	Yes
Headphone connectivity	3.5 mm
Product color	Black
Power source	DC
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Depth	162 mm
Width	140 mm
Height	40 mm
Weight	1100 g