Icom IC-2300H User Manual

Previous view
39
■ Pocket beep operation
This function uses subaudible tones as calling, and can
be used as a “common pager” to inform you that some-
one has called while you were away from the trans-
ceiver.
D Waiting for a call from the specifi c station
q Set the operating frequency.
w Push [SET] to enter the Set mode.
e Set the tone frequency, or DTCS code and DTCS
polarity.
r Push any key other than [SET] or [MONI] to exit the
Set mode.
t Push [TONE] several times until “ ” or “ ” is
displayed, to respectively turn ON the pocket beep
with tone squelch or DTCS squelch.
y When a signal with the matched tone is received,
beep tones and the “ ” icon blinks.
• The beeps sound for 30 seconds and the “ ” icon
blinks. To manually stop the beeps and blinking,
push any key. When the beep tones are not manu-
ally stopped, the “ ” icon continues blinking until
[PTT] is pushed.
u Push [PTT] to answer.
• The “ ” icon disappears and automatically cancels
the pocket beep function.
i Push [TONE] several times until the “ ” icon or the “
” icon disappears, to cancel the tone or the DTCS
Squelch function.
Using the HM-133V
z Set the operating frequency.
x Push [SET] to enter the Set mode.
c Set the tone frequency, or DTCS code and DTCS
polarity.
• Push [CLR] to exit the Set mode.
v Push [FUNC] , and then push [TSQLS] or
[DTCSS] , to respectively turn ON the pocket
beep with tone squelch or DTCS squelch.
b When the matched tone is received, the transceiver
emits the beep tones for 30 seconds and the “ ”
icon blinks.
n Push [PTT] to replay, or push [CLR] to stop the
beeps and fl ashing.
• The “ ” icon automatically disappears and cancels
the pocket beep function.
m To cancel the tone squelch or DTCS Squelch func-
tion, push [FUNC] then [T-OFF] .
• The “ ” icon or “ ” icon disappears
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push [SET] to enter the Set mode.
Push
[TONE] one or more times to turn ON the Pocket Beep function.
When a signal with the matched tone is received...
Push [SET] or [MONI] to select the item,
and then rotate [DIAL] to set the option or value.
Appears when the pocket beep
with tone squelch is activated.
Appears when the pocket beep
with DTCS squelch is activated.
Setting the tone frequency Setting the DTCS code
Setting the DTCS polarity
Beep Beep Beep
Push any key other than [SET] or
[MONI] to exit the Set mode.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push to enter the Set mode.
Push then or to turn ON the Pocket Beep function.
Push to select the item,
and then push to set the option or value.
Appears when the pocket beep
with tone squelch is activated.
Appears when the pocket beep
with DTCS squelch is activated.
Setting the tone frequency Setting the DTCS code
Setting the DTCS polarity
/
Push to exit the Set mode.
/
POCKET BEEP AND TONE SQUELCH
10

Icom IC-2300H Specifications

General

Radio type	Portable
Supported radio bands	FM
RMS rated power	65 W
Display type	LCD
Backlight color	Amber/Yellow/Green
Built-in display	Yes
Headphone connectivity	3.5 mm
Product color	Black
Power source	DC
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Depth	162 mm
Width	140 mm
Height	40 mm
Weight	1100 g