46
6
PRIORITY WATCH
New2001
6
PRIORITY WATCH
New2001
■ VFO and a Priority channel
D VFO frequency and a Priority channel
Checks the selected Priority channel every 5 seconds, while
receiving on a VFO frequency.
Set the VFO frequency. (p. 24) q
Set the Priority channel. (p. 29) w
•SelectaMemorychannel,BankchannelorCallchannel.
Push [MENU e ]C.
•EnterstheMENUmode.
r Rotate [DIAL]S to select “PRIO” (Priority scan).
Push [ t ï]D.
Rotate [DIAL] y S to select “ON” or “Bell.”
•ON:StartsPriorityWatch.
•Bell:StartsPriorityWatch.
When a signal is received on the Priority channel,
the “
” icon appears on the display.
Push [ u ï]D.
Push [MAIN BAND] i S.
•ExitstheMENUmode.
•The“PRIO”iconappears,andthePrioritywatchstarts.
•TocancelthePrioritywatch,select“OFF”instepy.
Example:
Checks Memory channel “11” while receiving on
433.920 MHz.
Checks the Memory channel every 5 seconds.
Appears
Priority
channel
D VFO scan and a Priority channel
Checks the selected Priority channel every 5 seconds, during
a VFO mode scan.
Do steps q q through i as shown to the left.
•The“PRIO”iconappears,andthePrioritywatchstarts.
Hold down [V/MHz SCAN] w S for 1 second.
Rotate [DIAL] e S to select a desired scan type.
Push [V/MHz SCAN] r S.
•TheVFOscanstarts.
To Next Page
Loading...
Need help?
General
