New2001
71
New2001New2001
Bluetooth
®
OPERATION
11
■ Operating Bluetooth
®
When you install the optional UT-133 Bluetooth
®
u n i t in the
transceiver, you can connect to other Bluetooth
®
devices.
In this section, the IC-2730A/E with the UT-133 is described
as simply “transceiver.”
When you connect the VS-3 Bluetooth
®
h e a d s e t to the trans-
ceiver, you can wirelessly transmit and receive the headset
audio.
The VS-3 has a [PTT] switch, so you can transmit in the same
way as using the transceiver’s [PTT] switch.
The VOX function can also be used, so you can toggle trans-
mit and receive by your voice through the headset.
You can assign a desired key function to the keys on the side
panel of the VS-3 to remotely operate the transceiver.
Communication range of Bluetooth
®
is approximately 10 me-
ters (32.8 ft).
The Bluetooth
®
communication range may vary, depending
on the environment in which the device operates.
Microwave ovens or Wireless LANs may cause interference.
In that case, stop using those devices or move away from
them.
This Bluetooth
®
device has a range of use. If the communi-
cation is unstable, use the device within the range.
■ Electromagnetic Interference
When you use a Bluetooth
®
device, pay attention to the fol-
lowing:
Bluetooth
®
devices operate on the 2.4 GHz band.
The 2.4 GHz band is also used by other devices, such as
Wireless LAN products, microwave ovens, RFID systems,
amateur radio stations, and so on.
When using the Bluetooth
®
device near such devices, inter-
ference may occur, causing a decrease in communication
speed, and an unstable connection.
In such cases, use this device away from the other devices,
or stop using those devices.
Bluetooth
®
Optional VS-3
(Bluetooth
®
Headset)
UT-133
T r ansceiver with
the Bluetooth
®
unit
To Next Page
Loading...
Need help?
General
