4-2
■ ENTERING THE ADJUST MODE
1. Turn OFF the power.
2. Connect the shunt plug to the [REMOTE] connector on
the rear panel. (See below)
to [REMOTE]
3.5 mm (⅛ inch)
monaural plug
(Shunt)
3. While holding down both [MENU] and [FUNCTION], turn
ON the transceiver power to enter the adjust mode.
[POWER]
[MENU] [FUNCTION]
4. The adjust mode main menu is displayed.
■ KEY ASSIGNMENTS FOR THE ADJUST MODE
• Touch [▼] to select the next adjustment item, touch [▲] to
select the previous adjustment item.
• Rotate [MAIN DIAL] to set or modify the adjustment value.
• Touch [SET] to store the adjusted value, and select the
next adjustment item.
• Push [EXIT] to return to the previous screen.
Stores the adjusted value.
Selects the next adjustment item.
Selects the previous adjustment item.
Adjustment item name
Adjustment value
[MAIN DIAL][EXIT]
www.PH4X.com
To Next Page
Loading...
Need help?
General
