72
MEMORY OPERATION
1
2
3
4
5
6
8
9
11
12
13
14
15
16
17
18
19
20
21
7
10
7
The Memory channel contents (frequency, operating
mode, etc.) can be copied to the VFO.
The copy can be performed in either the VFO mode or
the Memory mode.
D Copying in the VFO mode
This is useful for copying programmed contents to
a displayed VFO.
q Push [VFO/MEMO] to select the VFO mode.
w Push [Y] or [Z] to select a Memory channel num-
ber to be copied.
•“ ” appears if the selected Memory channel is a
blank channel. In this case, nothing can be copied.
e Hold down [VFO/MEMO] for 1 second to copy the
Memory channel contents into the VFO.
•Threebeepssoundwhenthecopyiscomplete.
D Copying in the Memory mode
This is useful for copying the Memory channel con-
tents while operating in the Memory mode.
When you have changed the displayed frequency,
operating mode, etc. in the selected Memory chan-
nel:
•Displayed data is copied.
•Programmed contents in the Memory channel are
not copied, but remain in only the Memory chan-
nel.
q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select a Memory channel to be
copied.
•“ ” appears if the selected Memory channel is a
blank channel. In this case, select another channel.
•Setthefrequencyoroperatingmodeifrequired.
e Hold down [VFO/MEMO] for 1 second to copy the
Memory channel contents into the VFO.
•Threebeepssoundwhenthecopyiscomplete.
r Push [VFO/MEMO] to select the VFO mode.
■ Memory contents copying
While in the Memory mode
Hold down
Push
While in the VFO mode
Hold down
The Memory channel contents are copied
The Memory channel contents are copied
To Next Page
Loading...
Need help?
General
