Image Access bookeye 3 User Manual

Page 28 Operation Manual
B.1.2.1 Book Fold Options
Clicking on (Options) opens an additional window.
It allows to set the value for the margins, the left
and the right center position as well as the
threshold value.
The unit of measurement is “mil”. This unit of
measurement is defined as 1000 mil = 1 inch.
The Surface Properties slider allows to modify
the correction of different surfaces from matte to
glossy.
The Retouch Bookfold switch is either auto,
manual or off. If auto is selected, the width of the
bookfold area will be detected automatically and
filled. If manual is selected the sliders for
Left Center Position and Right Center Position
define the width of the filled area.
The Retouch Pattern switch is either auto, black
or white. If auto is selected the pattern matches
with the pattern in the bookfold area, otherwise it
is black or white.
B.1.2.2 Fixed Focus Mode
If Fixed Focus Mode is selected, the scanner
only focuses on one position.
The height above the base plate of this position
is controlled by the user via the menu on the left.
Move the slider or enter the value directly in the
field on the right.
The unit of measurement is “mil”. This unit of
measurement is defined as 1000 mil = 1 inch.
Picture 13: Book Fold Option screen
Picture 14: Book Fold Option screen

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English