Name Illustration
6 Name plate See Product Overview for detailed information
7 Potentiometer knob Refer to the Keypad Operation Procedure
8 Control terminals See Electric Installation for detailed information
9 Main circuit terminals See Electric Installation for detailed information
10 Screw hole Fix the fan cover and fan
11 Cooling fan
See Maintenance and Hardware Fault Diagnose for
detailed information
12 Fan cover Protect the fan
13
Bar code
The same as the bar code on the name plate
Note: The bar code is on the middle shell which is onder the
cover
Note: In above figure, the screws at 4 and 10 are provided with packaging and specific installation depends
on the requirements of customers.
Below is the layout figure of the inverter (Three phase 380V, ≥4kW) (take the inverter of 4kW as the
example).
Figure 2-3 Product structure(Three phase 380V, ≥4kW)
Serial No.
Name Illustration
1 External keypad port Connect the external keypad
2 Cover Protect the internal parts and components
3 Keypad Refer to the Keypad Operation Procedure
4 Cooling fan
See Maintenance and Hardware Fault Diagnose for
detailed information
5 Name plate See Product Overview for detailed information
6
Cover for the heat emission
hole
Optional, enhancement of the protective degree. It is
necessary to derate the inverter because the internal
To Next Page
Loading...
Need help?
General