Installation
Copyright ©ITECH Electronic Co., Ltd. 29
NOTE
The T8230-350-180 consists of two 15kVA in parallel mode. Connect the Remote
sense terminals of master module. The wiring method is the same as other
models.
⚫ The connection diagram of single phase is shown as follow:
NOTE
When the input voltage is DC voltage, the input terminal L is positive, and N is negative.
⚫ When used as a three-phase power output, he Y connection mode is used
as an example, The connection diagram is shown as follow:
When Delta connection mode is selected in the system menu, the N wire
does not need to be connected. the N line of the Sense terminal needs to
be connected to the N terminal of the output terminal.
To Next Page
Loading...
Need help?
General
