ITech IT8200 Series User Manual

System-Related Functions
Copyright ©ITECH Electronic Co., Ltd. 61
Phase
Select the phase to monitor.
This cannot be set in single phase
mode.
U ratio
The external program ratio of
voltage.
I ratio
The external program ration of
current.
Remote sense
Set the sense function state.
Mode
On: Enable the remote sense
Measurement
Off: disable the sense function
On/Off phase
On-mode
Input on phase control
Phase: setting the phase
Imm: immediately
Off-mode
Input off phase control
Phase: setting the phase
Imm: immediately
Measurement
Set the measurement speed
Lower
（1000ms）
Lower mode, measuring every
1000ms
Slow（500ms）
Slow mode, measuring every
500ms
Medium
（300ms）
Medium mode, measuring every
300ms
Fast（150ms）
Fast mode, measuring every
150ms
Filter
Whether to turn on the filter during
measurement.
General
Buzzer
Set the keyboard sound
Key
Buzzer on/off for key
Protect
Buzzer on/off for protect
Brightness
Set the screen brightness.
1-10
Set the screen brightness level
Factory-default-
settings
Select whether to reset the factory default settings or
not.
Enter
Confirm to reset operation
Power-on setup
Set the power-on state.
Reset
When the instrument is powered
on, the instrument will initialize
some settings and [On/Off] state.
Last
When the instrument is powered
on, the instrument will remain
the same settings and [On/Off]
state as last time
you turned off the instrument.
Last-OFF
When the instrument is powered
on, the instrument will remain
the same settings as last time you
turned off the instrument,
but the [On/Off] is OFF state.
Parallel mode
Set the instruments to parallel operation mode.
Parallel
⚫ Master: Set the instrument to
master mode.
Single: Set the instrument to single

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English