To Next Page

To Previous Page

System-Related Functions

Set the Parallel Mode

1. Turn on the main switch of the AC distribution box and power on each of the

three units.

2. Set three units in parallel mode with one master and two slaves.

3. Press the composite keys [Shift]+ (System) on the front panel to

enter the system menu.

4. Select General menu.

5. Set the Parallel Mode, set them to one master unit and two slave units. In

each group, one instrument must be the master unit and all other instruments

connected in parallel are slave units. All features are set up from the master

unit.

⚫ Single: Default value, indicates that the instrument is in single mode.

⚫ Master: Indicates that the single unit is set to master in parallel mode.

Numbers: total number of units in the parallel relationship, when the

instrument set to master, you need to set the Numbers. For example,

Numbers set to 3.

⚫ Slave: Indicates that the instrument is set to the slave in parallel mode.

6. After the parallel menu of the three units are set, restart the instrument

separately.

After the instrument is restarted, the screen shows that the instrument is

working in parallel mode.

Revert to Single Mode

1. Set each of the three instruments to single mode.

ITech IT8200 Series User Manual

Other manuals for ITech IT8200 Series