ITech IT8700 Series Programming Guide

SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 95
Examples
IMP 5 IMP:LEV 3.5
Query Syntax
[SOURce:]IMPedance[:LEVel][:IMMediate]? [ MINimum | MAXimum | DEFault ]
Returned Parameters
<NR3>
Related Commands
IMP:RANG
[SOURce:]IMPedance:RANGe
This command is used to set the resistance range when the load is in CZ mode.
Command Syntax
[SOURce:]IMPedance:RANGe <NRf+>
Parameters
MINimum through MAX | MINimum | MAXimum | DEFault
Unit
R(ohms)
Returned Parameters
MAXimum (high range)
Examples
IMP:RANG 15 SOUR:IMP:RANGE MIN
Query Syntax
[SOURce:]IMPedance:RANGe? [ MINimum | MAXimum | DEFault ]
Returned Parameters
<NR3>
[SOURce:]IMPedance:RESistance
This command is used to set the resistance value series to the capacitance
when the load is in CZ mode.

ITech IT8700 Series Specifications

General

Brand	ITech
Model	IT8700 Series
Category	Test Equipment
Language	English