List Commands
Copyright © Itech Electronic Co., Ltd. 99
Chapter11 List Commands
List commands let you program complex sequences of input changes with rapid,
precise timing, and synchronized with trigger signals. Each function for which
lists can be generated has a list of values that
specify the input at each list step.
[SOURce:]LIST:RANGe
This command sets the current range for list mode.
Command Syntax
[SOURce:]LIST:RANGe <NRf>
Parameters
MIN through MAX
Unit
None
Examples
LIST:RANGE 30
Query Syntax
[SOURce:]LIST:RANGe?
Returned Parameters
<NR3>
Related Commands
LIST:LEV
[SOURce:]LIST:COUNt
This command sets the number of times that the list is executed before it is
completed. The command accepts parameters in the range 1 through 65536,
but 65536 is interpreted as infinity.
Command Syntax
[SOURce:]LIST:COUNt <NRf+>
To Next Page
Loading...
Need help?
General
