ITech IT8700 Series Programming Guide

SCPI Measurement Command
Copyright © Itech Electronic Co., Ltd. 54
Returned Parameters
<NRf>
FETCh:CURRent:MAX?
This command is used to read the max voltage of the latest measurement.
MEASure:CURRent:MAX?
This command initiates and executes a new maximum current measurement,
and returns the measured input maximum current of the electronic load.
Command Syntax
FETCh:CURRent:MAX?
MEASure:CURRent:MAX?
Parameters
None
Returned Parameters
<NRf>
FETCh:CURRent:MIN?
This command is used to read the min voltage of the latest measurement.
MEASure:CURRent:MIN?
This command initiates and executes a new minimum current measurement,
and returns the measured input minimum current of the electronic load.
Command Syntax
FETCh:CURRent:MIN?
MEASure:CURRent:MIN?
Parameters
None
Returned Parameters
<NRf>

ITech IT8700 Series Specifications

General

Brand	ITech
Model	IT8700 Series
Category	Test Equipment
Language	English