ITech IT8700 Series Programming Guide

SCPI Measurement Command
Copyright © Itech Electronic Co., Ltd. 55
FETCh:POWer[:DC]?
This command is used to get the latest measured DC power.
Command Syntax
FETCh:POWer[:DC]?
Parameters
None
Examples
FETC:POW?
Returned Parameters
<NRf>
FETCh:CAPability?
This command is used to get the latest measured discharging capability.
MEASure:CAPability?
This command initiates and executes a new discharging capability
measurement, and returns the measured input discharging capability of the
electronic load.
Command Syntax
FETCh:CAPability?
MEASure:CAPability
Parameters
None
Returned Parameters
<NRf>
FETCh:ALLVoltage?
MEASure:ALLVoltage?
This command is used to read the latest measured voltage of all channels of
the instrument.

ITech IT8700 Series Specifications

General

Brand	ITech
Model	IT8700 Series
Category	Test Equipment
Language	English