ITech IT8800 Series User Manual

Quick Start
Copyright © ITECH Electronic Co., Ltd. 10
Chapter2 Quick Start
This Chapter will introduce power-on check steps of IT8800 Series to ensure
normal start-up and usage under initialization status of the load. Besides, to
facilitate usage, this part also displays the functions of front board, rear board
and keyboard keys as well as display functions of VFD (Vacuum Fluorescent
Display) to a quick view of load appearance, structure and key usage functions
before operation.
2.1 Brief introduction
IT8800 Series is a single-input programmable DC electronic load. Built in with
RS232, USB and GPIB communication interfaces, this series of programmable
DC electronic load provides a multi-purpose solution to meet different design
and test requirements.
This Series delivers special functions and advantages at international level,
including:
 High-visibility vacuum fluorescent display (VFD)
 Dynamic mode: up to 25KHz
 Voltage measurement dissolution rate: up to 0.1 mV Current 0.01 mA (10
uA)
 Voltage and current measurement speed: up to 50 KHz
 Four operation modes: constant voltage, constant current, constant
resistance and constant power.
 Rotary coding switch for easy and quick operation
 Remote sense function
 Battery test function
 OCP test, OPP test
 Auto test function
 CR-LED test
 Memory capacity: 100 groups
 Short-circuit function
 Dynamic test function
 Portable and robust enclosure equipped with skid resistant foot stand
 Intelligent fan control
 Built-in Buzzer, for warning
 Outage backup memory
 Built-in GPIB, USB and RS232 communication interfaces
Model Selection Table for IT8800 Series:
Model
Voltage
Current
Power
Height
IT8813 120V 60A 750W 3U
IT8813B 500V 30A 750W 3U
IT8813C 120V 120A 1500W 3U
IT8814 120V 120A 1500W 3U
IT8814B 500V 60A 1200W 3U

ITech IT8800 Series Specifications

General

Brand	ITech
Model	IT8800 Series
Category	Test Equipment
Language	English