7 MAINTENANCE AND LUBRICATION
en-64
7Maintenance and Lubrication
7.1 MAINTENANCE AND LUBRICATION CHARTS __________________________________
Machine Service Interval Chart
Interval Item Section
First 50 hours • Change the Engine oil
• Change the engine oil filter
• Change the Hydraulic Filter
• Check steering system
• Check electrical wiring
• Check alternator belt tension
7.4
7.4
7.7
6.3
6.2
Each day
10 hours
• Check Safety Interlock System
• Check engine oil level
• Check engine coolant Level
• Check air filter service indicator
• Check the Hydraulic Fluid Level
• Check the fuel level
• Check tire Pressure
• Clean radiator screens
• Check Grease Points & Lubricate as required
• Check alternator belt tension
5.2
7.4
7.5
7.6
7.9
7.15
7.1
6.2
Each week
Every 50 hours
• Check for Loose Components
• Check for Hydraulic Leaks
• Check fuel lines and fittings
• Drain water from fuel system
• Check air filter
7.6
7.9
7.9
7.10
Every 250 Hours • Check radiator hoses
• Check intake air hoses@
• Check hydraulic hoses and tubes
• Check muffler and exhaust
7.5
7.10
7.8
7.13
Every 500 Hours • Change the fuel filter
• Change the engine oil
• Change the engine oil filter
• Change the alternator belt
7.9
7.4
7.4
6.2
End of season
Every 1000 hours
• Check Battery Condition
• Change the Hydraulic Oil and Filters
• Change the air filter element@
• Check valve clearance
7.12
7.6
7.10
Every 1500 Hours • Check injection nozzle pressure@
• Check EGR Cooler
• Change oil separator element
Every 3000 Hours • Check Turbocharger
• Check EGR system
• Clean DPF Filters
Every Year • Check air intake hose
• Check EGR piping
• Check DPF related piping
• Check Exhaust manifold for cracks or gas leaks, looseness or damage
To Next Page
Loading...
Need help?
General
