QUALITY OF CUT 10
en-95
10.8 MISMATCHED CUTTING IMPLEMENTS ________________________________________
NOTE: Arrow indicates direction of travel.
Mismatched cutting implements is a pattern of different
cutting heights, that gives the grass a stepped cut
appearance. This appearance is normally because of a
mismatched HOC (height-of-cut) adjustment from one
cutting implement to another implement.
Probable Cause Remedy
HOC is different from one cutting implement to another
implement.
Check and adjust the HOC on cutting implements to
same height.
Difference in cutting implement motor speeds. Check the operation of cutting implement motor(s).
Repair or replace as necessary.
Difference in mower ride height side to side. Check and adjust the tire inflation pressure.
Check and adjust for even mower weight distribution.
TN1278
To Next Page
Loading...
Need help?
General
