Jacuzzi J-585 User Manual

Page 44
12.6 Water Care Programming
Water care is crucial to maintaining a healthy and clean spa. The
CLEARRAY water purication system leads the way by sanitizing the
water using a UV light bulb. Your spa can be programmed to remind you
when to check and replace certain components.
From the “Settings” menu, tap
>
next to “Water Care” to enter the
programming options, Figures 12.6a and 12.6b.
A. Programming the CLEARRAY UV Bulb Timer
The CLEARRAY UV bulb has a life expectancy of 1-year. A timer
activates when power is applied and begins a countdown starting at
365 days. Once the timer expires, an error message will appear of the
display, the UV bulb must be replaced and the timer needs to be reset.
1. When you enter the “Water Care” Menu,
Figure 12.6c, you will able to set the
CLEARRAY UV bulb timer.
2. Slide your nger up and down to roll
the days scroll wheel to adjust the
number of days from OFF to 365. The
adjustments are made in increments
of 10 days. The CLEARRAY UV timer
counts down by days not usage. The days are stored
in memory if the power is interrupted.
Note: It is not recommended that this feature be turned OFF. In order to
continually have the CLEARRAY system effectively preform its function,
it should be program as instructed.
3. Tap
Set
to conrm and save your changes.
4. When the timer expires, a message will appear on the control panel
display, page 67. The CLEARRAY UV bulb must be replaced
(page 62) and the timer must be reset. Tap “reset” and follow the
instructions above to reset the timer. If you tap “snooze” the message
will clear but the error icon will display and the reminder screen
will reappear in 10 days.
Water Care
WiFi
Heat & Filter
SETTINGS
>
>
>
Water Care
set to
365
0 days
CLEARRAY
>
Set
>
Figure 12.6a
Figure 12.6b
Water Care
set to
365
0 days
Set
>
CLEARRAY
>
Figure 12.6c

Jacuzzi J-585 Specifications

General

Brand	Jacuzzi
Model	J-585
Category	Hot Tub
Language	English