18
7.0 Power Requirements
Jacuzzi® swim spas are designed to provide opmum performance and flexibility of use when
connected to their maximum electrical service. They are configured at the factory. The most
common electrical connecons are listed below.
EUROPEAN
MODELS (50 Hz)
VOLTAGE 230VAC
MAX CURRENT DRAW
Power Acve Series 28
Power Pro Series 28
Frequency (Hz) 50
Number of wires 3
NORTH AMERICAN
MODELS (60 Hz)
240VAC
40
48
60
4
8.0 Swim Spa Fill Up Procedure
For best results, read each step in its enrety before proceeding with this procedure. Make
sure that all drains and drain plugs are closed.
1. Prepare the Swim Spa for Filling
Clear all debris from the swim spa (Although the swim spa shell has been polished
at the factory, you may want to treat it with a specially formulated spa cleaner.)
Consult your authorized Jacuzzi dealer for addional informaon prior to filling.
Remove both filters, skimmer, polishing filter lids and filters.
2. Fill Swim Spa
Place the end of your garden hose into empty skimming filter fing as you stand
next to the swim spa. Fill swim spa half way, then place the garden hose into the op-
posite filter fing while adding the remaining fill water.
CAUTION: TO DECREASE BUILD UP ON COMPONENTS AND MINIMIZE ACRYLIC DAMAGE.
Never fill with water from a water soener. If your water is extremely “hard”, it is
preferable to fill half-way with hard water and the rest of the way with soened wa-
ter. Water that is too so can be corrosive to metal components.
To Next Page
Loading...
Need help?
General