Jacuzzi SWIMSPA Power Actve J16 User Manual

49
13.3 Other Addives
Many other addives are available for your swim spa. Some are necessary to compensate for
out of balance water, some aid in cosmec water treatment and others simply alter the feel
or smell of the water. With our chemical products your authorized Jacuzzi dealer can advise
you on the use of these addives. Jacuzzi chemicals are for use in the U.S. only.
13.4 CLEARRAY® (Ultraviolet) Water Purificaon System
CLEARRAY Water Purificaon System is exclusive technology ulizing natural ultraviolet tech-
nology to eliminate waterborne bacteria, viruses and algae in swim spas. The ultraviolet light
otherwise known as UV-C or germicidal light inacvates the microorganisms disrupng the
DNA so that it cannot reproduce and is considered lifeless. CLEARRAY is plumbed in-line with
your filtraon system. Aer the water is drawn from the pump, filter and heater it is directed
through the CLEARRAY system. Water passes through an ultraviolet light energy that treats
and disinfects the water. The water is then pumped back into the swim spa giving you crystal
clear water instantly. The system has a ballast that is the power supply for the purificaon sys-
tem; it has two LED indicator lights. The “Power On” (red color) indicang incoming power
flow and the “Lamp On” (green color) indicang the system is properly working. CLEARRAY is
standard on all models.
Aer a year the bulb must be replaced. If the CLEARRAY mer has been programmed correct-
ly a message will appear on the LCD display when the me alloed has expired. In order to
clear the message, a new CLEARRAY UV bulb needs to be installed and the me must be re-
set. Contact your authorized Jacuzzi dealer to assist in changing our the bulb.
14.0 Error / Display Messages
There are a number of unique funcons designed into your Jacuzzi swim spa to protect it from
damage and / or to aid in troubleshoong. When this occurs the swim spa will nofy you by
showing the screen below, Figure 14.0a. A solid white light indicates that all operaons are
normal. A solid red light indicates that immediate aenon is required to clear or fix an error
code. Following is a list of all the possible messages along with their meanings. Always insist
on genuine Jacuzzi replacement parts.
Note: if you tap “X” the display will change to Figure 14.0b. The error icon will remain on the
screen as a reminder. If the error is not taken care of or fixed, the error display will reappear
in 2 hours, Figure 14.0a.

Jacuzzi SWIMSPA Power Actve J16 Specifications

General

Brand	Jacuzzi
Model	SWIMSPA Power Actve J16
Category	Hot Tub
Language	English