Jacuzzi SWIMSPA Power Actve J16 User Manual

28
10.2 Navigaon
 Navigang the enre menu structure is done by touching the screen.
 The two screen selecons indicated below can be selected. Touch one of these to enter a
different screen with addional controls.
 Most menu screens me out and revert to the main screen aer 30 seconds of no acvi-
ty.
 At the boom of the screen, at certain mes an indicator may appear showing that a
message is waing. Touch this indicator to go to the Message Display Screen. On that
screen some of the messages can be dismissed.
NAVIGATION
Sengs Spa Equipment
MESSAGES
A warning message is waing
10.3 The Spa Screen
The Spa Screen shows all available equipment to control. The display shows icons that are re-
lated to the equipment installed on a parcular swim spa model, so this screen may change
depending on the installaon. The icon buons are used to select and control individual de-
vices.
Some devices, like pumps, may have more than one ON state, so the icon will change to re-
flect the state of the equipment. Below are some examples of 2-speed pump indicators.
Press Up or Down to display the Set Temperature (indicated by a flashing
o
F or
o
C, plus a change in colour of the temperature). Press up or Down again to
modify the Set Temperature. The Set Temperature changes immediately.
If you need to switch between High Temperature Range and Low Temperature
Range you need to go to the Sengs Screen.

Jacuzzi SWIMSPA Power Actve J16 Specifications

General

Brand	Jacuzzi
Model	SWIMSPA Power Actve J16
Category	Hot Tub
Language	English