Jacuzzi SWIMSPA Power Actve J16 User Manual

36
Freeze Protecon
If the temperature sensors within the heater detect a low enough temperature, then the
pump(s) automacally acvate to provide freeze protecon. The pump(s) will run connuous-
ly or periodically depending on the condions.
Clean Up Cycle (oponal)
When a pump is turned on by a buon press, a clean-up cycle begins 30 minutes aer the
pump is turned off or mes out and will run up to 4 hours depending on how long you pro-
gram it for. The pump and the ozone generator will run for 30 minutes more, depending on
the system. On some systems you can change this seng.
10.6 Time of Day
Be sure to set the Time of Day. Seng the me of day is important for determining the filtra-
on mes and other background features. The Heat Icon on the Sengs Screen takes you
to a screen where you control the Time-of-Day.
On the Time-of-Day screen, simply select the Hours and Minutes. Use the Up and Down
buons to make changes, then Save.
If no Time-of-Day is set…
In the memory an informaon screen will appear. If you exit it an Informaon Icon will appear
at the boom of the Main Screen, unl the me-of-day has been set.

Jacuzzi SWIMSPA Power Actve J16 Specifications

General

Brand	Jacuzzi
Model	SWIMSPA Power Actve J16
Category	Hot Tub
Language	English