❼ ❻
4-8-4. How to display the number of pieces produced
No. Item Setting range Initial value
U11
Type of display of
the target number
of pieces to be
produced
The type of display for the target number of pieces to be
produced (display section
D
) is changed over with this pa-
rameter.
1: The target number of pieces at the current time is dis-
played by calculating it at all times.
* Display section
E
: The actual number of pieces pro-
duced at the current time / The target number of pieces
to be produced at the current time × 100 (%)
0: The target number of pieces to be produced for the day
is displayed.
* Display section
E
: The actual number of pieces pro-
duced for the day / The target number of pieces to be
produced for the day × 100 (%)
0 - 1 0
Display section E
Display
section C
Display
section D
< Number of pieces produced display screen >
1) Press
in the normal sewing
state. Then, the “number of pieces pro-
duced” display screen displayed.
2) The number of pieces produced for the data is displayed on the display section
C
. Every time the sewing
machine performs sewing and thread trimming, "1" is added to the current value displayed in the display
section
C
.
The number of pieces produced for the day displayed in the display section
C
can be increased / de-
creased by pressing
❻
.
* The number of pieces produced and the target number of pieces are reset to 0 (zero) two hours before the
starting time of work hours (U03).
3) The item displayed in the display section
D
can be changed over by setting the production support param-
eter.
* Changeover of the aforementioned type of display will also change the method to calculate the percentage
of the number of pieces produced that is displayed in the display section
E
.
– 36 –
To Next Page
Loading...
Need help?
General
