JUKI DDL-8000A User Manual

– 1 –
DDL-8000A-PMS DDL-8000A-PSH
Max. sewing speed
5,000 sti/min (P = Less than 4)
4,000 sti/min for "P= 4 or more"
4,500 sti/min (P = Less than 4)
4,000 sti/min for "P= 4 or more"
Stitch length 5 mm
Presser foot lift
Hand lifter 5.5 mm
Auto lifter 13 mm or more
Audio guidance Provided
Needle
*1
1738 Nm65 to 110 (DB × 1 #9 to 18)
134 Nm65 to 110 (DP × 5 #9 to 18)
1738 Nm125 to 160 (DB × 1 #20 to 23)
134 Nm125 to 160 (DP × 5 #20 to 23)
Lubricating oil JUKI NEW DEFRIX OIL No. 1 or JUKI CORPORATION GENUINE OIL 7
Motor AC servo motor
Noise
PMS ;
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 78.7 dBA ; (Includes K
pA
= 2.5 dBA) ; according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000 sti/min.
PSH ;
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 82.0 dBA ; (Includes K
pA
= 2.5 dBA) ; according to ISO 10821- C.6.2
-ISO 11204 GR2 at 4,000 sti/min.
1. SPECIFICATIONS
• The sewing speed will vary depending on the sewing conditions. The sewing speed preset at the time of
shipping is 4,000 sti/min.
*1 : Needle used depends on the destination.
1-1. Specications of the sewing machine head
1-2. Specications of the control box
DDL-8000A-P - B
Supply
voltage
Single phase
200 to 240V
3-phase
200 to 240V
Single phase
220 to 240V CE
Frequency 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz
Operating environment
Temperature : 0 to 35˚C
Humidity : 90% or less
Temperature : 0 to 35˚C
Humidity : 90% or less
Temperature : 0 to 35˚C
Humidity : 90% or less
Input 330VA 330VA 170VA
Face plate portion lubricating method
M Semi-dry
S Micro-quantity lubrication
Seam specication
S Medium-weight materials
H Heavy-weight materials
Needle thread nipper specication
N With
0 Without

JUKI DDL-8000A Specifications

General

Brand	JUKI
Model	DDL-8000A
Category	Sewing Machine
Language	English