EasyManuals Logo
Home>JUKI>Sewing Machine>DDL-8000A

JUKI DDL-8000A User Manual

JUKI DDL-8000A
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
– 43 –
Application
Function setting
Output function
No. P139 No. P141 No . P142
0 0 or 1 0 or 1
It works as normal touch-back switch.
1 0 0
When operating touch-back switch at the time of depressing front part
of the pedal, reverse feed stitching as many as the number of stitches
specied by the function setting No. P140 can be performed.
1 1 0
When operating touch-back switch at the time of either stop of the
sewing machine or depressing front part of the pedal, reverse feed
stitching as many as the number of stitches specied by the function
setting No. P140 can be performed.
1 0 1
When operating touch-back switch at the time of depressing front part
of the pedal, automatic thread trimming is performed after reverse
feed stitching as many as the number of stitches specied by the
function setting No. P140 has been performed.
1 1 1
When operating touch-back switch at the time of either stop of the
sewing machine or depressing front part of the pedal, automatic
thread trimming is performed after reverse feed stitching as many as
the number of stitches specied by the function setting No. P140 has
been performed.
Actions under each setting state
Used as the normal reverse feed stitching touch-back switch.
Used for reinforcing seam (press sewing) of the pleats. (It works only while the sewing machine is in
operation)
Used for reinforcing seam (press sewing) of the pleats. (It works either when the sewing machine stops
or when the sewing machine is running.)
Used as starting switch for reverse feed stitching at the sewing end. (Used as the substitute for thread
trimming by depressing back part of the pedal. It works only while the sewing machine is in operation.
This is especially e󰀨ective when the sewing machine used as the sewing machine for standing work.)
Used as starting switch for reverse feed stitching at the sewing end. (Used as the substitute for thread
trimming by depressing back part of the pedal. It works either when the sewing machine stops or when
the sewing machine is running. It is especially e󰀨ective when the sewing machine is used as the stand-
ing-work machine.)

Table of Contents

Other manuals for JUKI DDL-8000A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI DDL-8000A and is the answer not in the manual?

JUKI DDL-8000A Specifications

General IconGeneral
BrandJUKI
ModelDDL-8000A
CategorySewing Machine
LanguageEnglish

Related product manuals