5. INPUTTING THE PRESSER TYPE
5-1 Setting procedure of the presser type
1
Display the data input screen.
Only in case of the data input screen (blue), the
contents of setting can be changed. In case of the
sewing screen (green), press READY key
and display the data input screen.
2
Call the presser type selection screen.
Press PRESSER TYPE SELECTION button
(A) and the presser type selection screen
is displayed.
3
Select the presser type.
Press button (B) of the presser type mounted
on the sewing machine. The button pressed is
shown in reverse video. Set the presser type
referring to Table of presser type described later.
4
Determine the presser type.
Press ENTER button (C) and the presser
type change screen is closed. Then the change
hasbeennished.
A
C
B
To Next Page
Loading...
Need help?
General
