Jungheinrich ERC 214 User Manual

8.11.3 Changing the Set-up Code
Requirements
– The truck is switched on, see page 158.
Procedure
• Press the key below the "Settings"
symbol (93).
• Press the key below the "Change set-
up code" symbol (94).
• Enter the set-up code using the keypad
(60).
The set-up code entered is shown in
the display unit (55) as filled-in circles.
• Press the key below the "Delete"
symbol (95).
The set-up code is deleted.
• Enter the new set-up code using the
keypad (60).
Z
The new set-up code must be different
from existing access codes.
• Press the key below the "Confirm"
symbol (96).
The new set-up code is displayed.
Z
If the new set-up code has been
entered incorrectly, delete it and enter
the correct set-up code.
To return to the main menu, press the
key below the "Back" symbol (97).
The set-up code has been changed.
60
95
93
96
97
94
55
159
04.19 en-GB

Jungheinrich ERC 214 Specifications

General

Brand	Jungheinrich
Model	ERC 214
Category	Forklifts
Language	English