5.2 Lateral Battery Removal (ERC 212/214/216)
Z
Lateral battery removal is an option only.
CAUTION!
Trapping hazard
Trapping hazard when removing and installing the battery.
u
When removing and installing the battery do not put your hands between the
battery and the chassis.
Battery removal
Requirements
– Park the truck securely, see page 76.
– Expose the battery, see page 46.
Tools and Material Required
– Battery replacement station / trolley
Procedure
• Disconnect the battery connector from the truck connector.
Z
Place the battery cable on the tray so that it cannot be severed when the battery
is pulled out.
• Turn the battery lock (53) up as far as the stop.
• Move the lever (52) to force the battery slightly beyond the perimeter of the truck.
• Position the battery trolley by the truck.
• Pull the battery (54) slightly towards you.
• Carefully pull the battery from off the truck onto the trolley.
The battery is now removed.
Battery installation
Requirements
– Park the truck securely, see page 76.
Procedure
Z
Assembly is the reverse order. Note the correct assembly position and make sure
the battery is connected correctly.
Z
Place the battery cable on the tray so that it cannot be severed when the battery
is inserted.
• Push the battery into its receptacle.
• Push the battery lock (53) towards the battery tray as far as the stop.
59
04.19 en-GB
To Next Page
Loading...
Need help?
General
