5.3.1 Example of Use of Capacity Plate
1150 mm
800 mm
(575 mm)
(400 mm)
2900
3200
3600
1200
1050
850
500
1200
1050
850
600
700
700
600
700
SERIAL NO.
kg
mm
mm
Example load (palletised):
– several cardboard boxes of the same size and same weight
– Load height: 800 mm
– Load length: 1150 mm
– Distances between the load centre distance and the load handler:
400 mm vertical, 575 mm horizontal
Z
For loads with an even weight distribution, the load centre distance lies in the
geometrical centre of the volume.
Z
For rectangular loads with an even weight distribution over the entire volume the
load centre distance is in the middle, i.e. half the length, half the height and half the
width of the load.
Load centre distance of the load handler:
– The capacity plate specifies valid load centre distances for the load handler of
500 mm, 600 mm and 700 mm.
– The second load centre distance suits the example load: At 600 mm it is greater
than the distances of 400 mm and 575 mm between the load centre of gravity and
the load handler .
Capacities as specified in the capacity plate depending on the lift heights at a load
centre distance of 600 mm:
– At a lift height of 2900 mm the maximum capacity is 1200 kg.
– At a lift height of 3200 mm the maximum capacity is 1050 kg.
– At a lift height of 3600 mm the maximum capacity is 850 kg.
5.4 Capacity Plate for Stacking and Transport Operations
Z
ERC 212z-216z only
Z
Not for double-decker option
The "stacking and transport operations" capacity plate (44) specifies the capacity (Q
in kg) of the truck during stacking and transport operations:
33
04.19 en-GB
To Next Page
Loading...
Need help?
General
