Load centre distance
The load centre distance D of the load handler is specified as the horizontal distance
from the front face and the vertical distance from the upper edge of the load handler.
Z
The capacity plate for standard load handlers specifies valid load centre distances of
500 mm, 600 mm and 700 mm.
The distances d
1
and d
2
depicted in the illustration between the load handler and the
actual centre of gravity G of the load must be smaller or equal to the load centre
distance D (d
1
≤ D and d
2
≤ D) to avoid the risk of overturning, see page 96.
Lift height limits
The arrow shaped markings on the outer mast (42) and
on the inner mast (43) indicate to the operator when the height limits specified on the
capacity plate have been exceeded.
32
04.19 en-GB
To Next Page
Loading...
Need help?
General
