2.1.2 Inspection contents
2.1.2.1 Standard equipment
The following points must be checked:
Electrical system
Warning and safety devices are in accordance with the operating instructions
Function of display and controls
The function of the emergency disconnect and for damage
Power supply
Battery and battery components for damage
The function and secure seating of the battery connector and for damage
Travel
The function of the collision safety switch and for damage
Wheels for wear and damage
Chassis/structure
Industrial truck for damage and leaks
Labels are legible, complete and plausible
Doors and/or covers for damage
Protective screen panel or protective grille for damage
Hydraulic operations
The function of the hydraulic system
The forks or load handler for wear and damage
209
04.19 en-GB