Current capacity plate
The capacity plate for stacking, transport and double-deck operations (44) specifies
the truck capacity Q (in kg) during stacking, transport and double-deck operations:
A= Stacking operations (storing and retrieving loads):
During high-level lifting (mast lift), observe the capacity depending on the lift
height, see page 31.
B= Transport operations:
Maximum capacity when transporting loads horizontally 2000 kg with the
support arms raised and without high-level lift (mast lift).
C= Double-deck operations:
Max. capacity for high-level lifting (mast lift) is ZZZ kg.
Maximum capacity for concurrent high-level lifting (mast lift) and low-level
lifting (support arm lift) is 2000 kg.
Z
During stacking operations with the low-level lift (support arm lift) raised, loads can
be stored and retrieved up to a lift height of 1800 mm. For lift heights above
1800 mm the low-level lift (support arm lift) must be lowered.
Z
With the ERC, do not transport loads (>500 mm) when they are raised.
Apart from double-deck operations, do not transport loads with the ERC-z when they
are raised (>500 mm).
Z
The maximum lift height for double-deck operations is 1800 mm.
36
04.19 en-GB
To Next Page
Loading...
Need help?
General
