JVC CA-TD5 User Manual

Zt-t
28
REPEAT
Unlocking the Electronic Lock
Using the Remote Control
Press the REPEAT button.
The display changes with each press of the button, as shown below.
—> ALL > 1CD— 1 — OFF — (back to the beginning)
@ “REPEAT ALL” and “REPEAT 1” remain on the display even when you change the CD play mode.
@® The three Repeat Modes above can be selected during Continuous Play, however, during Program
Play and Random Play, you can only select REPEAT ALL or REPEAT 1.
To exit Repeat Mode, select “OFF” in step 3.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation. When the electronic lock is on, the trays cannot be opened even if the & or ALL CD EJECT
button 1s pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Electronic Lock
Put the System’s power into STANDBY mode.
While pressing the g button, press the DISC 1’s 4 button.
“LOCKED” appears on the display to let you know that the trays
have been locked. a
ee a ae ee cae ee
i tithes ft to a
When the CD Player trays are locked, pressing the & or ALL CD EJECT buttons displays the
message “LOCKED” on the display and the trays do not open. And the & or ALL CD EJECT button
can not be used to automatically turn on the power.
» Put the System’s power into STANDBY mode.
While pressing the u button, press the DISC 1’s 4 button.
When the unlock operation is done, “UNLOCKED” appears ERE E-FE EE 4 OH
in the display to show that the lock has been taken off. bhiv bh Litem ££ yf
The trays can now be opened by pressing the & or ALL. CD EJECT button.
The & and ALL CD EJECT buttons can also be used to automatically turn on the power.
Using the Cassette Deck
(Listening to a Tape)
TAPE
DIRECTION
< a <4
TAPE button and TAPE CONTROL button
Press the TAPE or TAPE CONTROL button to switch
Tape Tray
= TAPE button
Press this to select the Cassette Deck as
the playback source. The button indica-
tor lights up and the «4 and », buttons
and the cursor keys operate in Cassette
Deck control mode.
This illustration shows
the Remote Control
for CA-TDS55R. The
Remote Control for
CA-TD5 does not
have the RDS
CONTROL button or
include any RDS
related labels.
Display
TAPE and counter display
Menu display
Tape Direction indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
This illustration shows only the Menu display items for the Cassette
the Remote Control to Cassette Deck control mode. Deck.
You can then use the { Md << | >> pp] >.
@“ and» A buttons to control the Cassette deck.
a
The Cassette Deck allows you to play and record audio tapes.
#8 Most tapes are now recorded with the Dolby NR system, so first check which type of the Dolby NR
system has been used on the tape. Only Dolby B NR is incorporated into the System.
Wi With Automatic Tape Detection, you can listen to type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play
Press the TAPE button (on the Unit or on the Remote Control).
Press the » A button on the Remote Control.(When the Remote
Control is in Cassette deck control mode}
‘The power comes on and “TAPE” lights up on the display. If there is a tape in the Tape Tray, the tape is
automatically played. If there is no tape in the Tape Tray, “OPEN” appears on the display and the Tape
Tray opens.
29
DOLBY B NR
AUTO REVERSE Doers = ll
Toemncemom COUNTER RESET
REVERSE ——t 25's ise el ae el,
MODE
English
YHSSQ1-VO/SQL-VO

JVC CA-TD5 Specifications

General

Brand	JVC
Model	CA-TD5
Category	Speaker System
Language	English