JVC CA-TD5 User Manual

cb-b
TAINEWS
Press the cursor key to the left or right (i«< < or > » 1) to select a ‘INFO
Select information you want by pressing the TA/NEWS/INFO button.
PTY SELECT Pry SELECT
EON
18
PTY.
The display changes with each press of the cursor keys as shown below:
+ Press the left (<<) cursor key
+ TRAFFIC <> NEWS ~~ INFO — POP M + ROCK M ~— M.O.R. M +>
LIGHT M «> CLASSICS «+> OTHER M — AFFAIRS +> SPORT <— EDUCATE
++ DRAMA «+ CULTURE ~~ SCIENCE <> VARIED +~
Press the right { >») cursor key
Press the PTY SEARCH button again.
While the search function is running, the selected programme type and “SEARCH” alternate on the
display. The preset number also change.
Using the Remote Control
Press the RDS CONTROL button.
Press the >» PTY SEARCH A button.
“PTY” and “SELECT” appear alternately on the display.
Note: If no adjustments are made for 5 seconds in PTY Search mode, the display reverts to the
previous display. Perform the next step while “PTY” and “SELECT” are being displayed.
Press the PTY SELECT - < «<4 <4) or >> PP > PTY SELECT +
button to choose a PTY.
* The programme type display changes with each press of the PT!'Y SELECT button as shown
below.
+ Press the PTY SELECT -< #4 << = button
+ TRAFFIC <— NEWS — INFO — POP M -— ROCK M + M.O.R. M
LIGHT M + CLASSICS «++ OTHER M — AFFAIRS «<> SPORT «> EDUCATE
++ DRAMA <— CULTURE «~ SCIENCE <-- VARIED «>
Press the >» pr > PTY SELECT + button >
Press the » PTY SEARCH < button again.
While the search function is running, the selected programme type and “SEARCH” alternate on the
display. The preset number also change.
Once the station which is broadcasting the selected PTY (Programme Type) is located, searching will
stop. Then the station name (if PS code is being sent) will be indicated and the broadcast will commence.
The Display will stay blinking for 10 seconds from the end of the searching function. If you press the
PTY SEARCH button again during this period, search for the same PTY (Programme Type) will restart.
The PTY Search function is completed when the indicated preset Number changes from blinking to
continuously lit.
@ If a station broadcasting a selected PTY( Program Type) cannot be found, “NOT” and “FOUND” are
displayed alternately on the display after the Unit has searched through the preset numbers. The Unit
will then return to the station to which it was tuned prior to the start of the PTY Search.
To cancel a PTY Search operation, press the PTY SEARCH button. “PTY” and “SELECT” are
displayed alternately on the display for a few seconds, then the display return to the screen that was
selected before PTY SEARCH was displayed.
Note: PTY Search can be used even while AM (MW/LW) broadcasts are being received.
EON Function
With the EON (Enhanced Other Networks) code, the Unit can perform a standby reception which will
enable you to obtain desired information which is available from other stations,
Mi “EON” will be displayed while receiving stations with an EON code.
MM EON Standby reception is applicable for preset stations only.
ME You can set EON Standby reception regardless of types of receiving bands.
Setting EON Standby reception
Press the EON ON/OFF button.
[TA NEWS INFO], or the last EON information type selected, is displayed.
TA: Identifies that a traffic announcement is being broadcast in your area.
NEWS: News
INFO: Programmes on medical service, weather forecast, etc.
* With each pressing of the TA/NEWS/INFO button, indications will change as follows:
[ TA ]>I[ NEWS }-[ iNFO ]—
[TA NEWS ]-{ NEWS INFO]—[TA INFO ] >
[TA NEWS INFO ] — (back to the beginning)
As soon as your selection is entered the Unit will go into EON Standby reception mode.
If you want to cancel the EON function, tum off the [TA NEWS INFO] indicator by pressing the EON
ON/OFF button.
When this Unit carries out EON Standby reception, the indication will
change as follows:
1. Waiting for EON Standby reception
2. Preset stations are being searched for and while
preparing to change the station, sound will be muted.
“—_
iets EB BECE aeEe =
3. The station will be changed and the programme type Blinking
being received will appear on the display.
* When using the DISPLAY MODE button to change the display, use the appropriate setting for the
type of display.
Notes:
* EON broadcasts of some stations may not be compatible with this Unit. In the case of an incompatible
EON broadcast, “EON” will not appear on the display.
* While the Unit is receiving information for an EON code you have selected for EON Standby, you
cannot use the following operations: cursor key, TA/NEWS/ENFO button or PTY SEARCH button. In
addition, if a station transmits information for a programme type you have selected without sending
the EON code, the EON Standby operation is still performed. Therefore, you will not be able to use
the operations listed above during this period.
* If the reception is unsatisfactory for a station among the preset stations, “WAITING” appears on the
display and the station is searched for again. If after searching through the channels five times, the
broadcasting station cannot be found, “NOT” and “FOUND” are displayed alternately on the display.
The Unit will then return to the station to which it was previously tuned.
When broadcasting of the desired information has been completed, “EON END” will be indicated and the
Unit will automatically go back to the station which had previously been tuned to,
3 While receiving information on EON Standby reception, the station will not change to other stations
even if the same information is available from them.
@ Jf you cancel the EON function when in EON Standby reception mode by either pressing the EON
ON/OFF button, the Unit will automatically return to the station which had been previously tuned-in,
If the information you are waiting for is available from the current station, the indicator will blink.
ALARM function
If an ALARM (Emergency) signal is received while receiving an EON code from a station, “ALARM”
blinks on the display and the Unit automatically switches to the station broadcasting the ALARM signal.
When an ALARM broadcast of PTY is being received from the currently tuned-in station, “ALARM” will
blink on the display for your attention.
19
HSSOL-VO/SCL-VO

JVC CA-TD5 Specifications

General

Brand	JVC
Model	CA-TD5
Category	Speaker System
Language	English