JVC CA-TD5 User Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the System Control Cord
Connect the components exactly as illustrated below.
Press the middle of
coef oo Ah€.connector unit
1it.clicks into... .
ale connector,
li
When you plug in the
_ System connector,
... ake sure that the
white line of the
While pushing both
ends of the connector,
pull it out,
Never pull on the
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
A. Using the Supplied Wire Antenna
The FM Wire Antenna provided can be connected to a FM 75-ohm COAXIAL as
temporary Measure.
B. Using the Coaxial Type Connector (Not Supplied)
A 75-ohm antenna with coaxial type connector (DIN 45325) should be connected to the
FM 75-ohm COAXIAL terminal.
S-l
FM Wire Antenna
system connecting - cords themselves. 5c img eras
cota ie on he leh Oe”
If reception is poor,
connect the outside
antenna.
Before attaching a 75 ohm
coaxial lead (the kind with a
round wire going to an outside
antenna), disconnect the
supplied FM Wire Antenna.
Connecting the External Wire
CAUTION: To prevent malfunction, connect the supplied wire as illustrated below.
" Outside FM antenna wire
=< External Wire
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
RX-TDS5S5R/RX-TD5
Connecting the AM (MW/LW) Antenna
a ee ia areeennninnenmennmemen antenna wire (Not supplied) If reception is poor, connect the outside antenna.
Note: Even’ when connecting .
an outside AM antenna,
keep the indoor AM loop
connected.
SS
SP
AM (MW/LW) Loop Antenna
Turn the loop until you
have the best reception Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
XT-TDSSR/XT-TDS5 RX-TD55R/RX-TDS
4 5
YHSSC1L-VO/SAL-VO

JVC CA-TD5 Specifications

General

Brand	JVC
Model	CA-TD5
Category	Speaker System
Language	English