Inserting an SD Card (GZ-HM300)
Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted,
recordings can be continued on the other card even if one card is full.
"Types of Usable SD Card" （A P.13）
1
Press the power button for more than 2 seconds to turn off this unit.
.
2
Open the card slot cover.
.
3
Insert an SD card into slot A.
.
.
CAUTION:
●
Make sure not to insert the card in the wrong direction.
It may cause damage to the unit and card.
●
Turn off the power of this unit before inserting or removing a card.
Memo:
●
Recording switches automatically from one card to another and vice
versa after the selected card is full.
"SEAMLESS RECORDING" （A P.101）
●
To record to the card, it is necessary to adjust media settings.
"VIDEO SLOT SELECTION (GZ-HM300)" （A P.127）
"IMAGE SLOT SELECTION (GZ-HM300)" （A P.128）
●
To use cards that have been used on other devices, it is necessary to
format (initialize) the card using “FORMAT SD CARD” from media set-
tings.
"FORMAT SD CARD" （A P.129）
Removing the Card
Push the card inward once, then pull it out straight.
.
Types of Usable SD Card
The following SD cards can be used on this unit.
SDHC Card
.
●
Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for
video recording.
SD Card
.
●
This unit supports 256 MB to 2 GB SD cards.
Operations are confirmed on the SD cards from the following manufactur-
ers.
●
Panasonic
●
TOSHIBA
●
SanDisk
●
ATP
Memo:
●
Using SD cards (including SDHC cards) other than those specified
above may result in recording failure or data loss.
●
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of
4 MB/s and 6 MB/s respectively during reading or writing of data.
Getting Started
14
To Next Page
Loading...
Need help?
General