22
Preparation:
• Turn ON the TV and select the VCR channel on TV.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
1
Press OSD.
The counter display shows the
tape running time during
playback or recording.
The Recorder will indicate REC
during recording for itself.
2
Press C.RESET at the desired
tape position.
The counter display will be reset
to the "00:00:00" position (e.g.
the beginning of recording).
3
Press 3 when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the ”00:00:00” position.
4
Press OSD once again to make the all indicator disappear.
The DISPLAY-button
Press DISPLAY during the playback. The clock and tape counter
alternate with each other in the display.
VCR
VCR
Counter Display
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
Note:
• When you load a video cassette, the dis-
play indication changes to "00:00".
• The counter display does not function
on non-recorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter display stops.
Note:
You can set the tape counter to 00:00:00 with C.RESET anytime.
Therefore, the counter display can also indicate 00:00:00, even when
the tape counter does not reach its beginning yet. Even if the tape
counter indicates 00:00:00, it can be rewinded moreover. If the tape
was rewinded over the point of 00:00:00, the minus mark (–) appears
in the counter display. Although the tape counter seems to forward
when you press , in fact the tape is being rewinded. When the
tape reaches the beginning, the tape-rewinding stops automatically.
CH 2
12:00 SUN
00:04:38 SP
STEREO
CH 2
12:00 SUN
00:00:00 SP
STEREO
VCR
VCR
2A77501B E(18-23) 5/30/02, 9:22 PM22
To Next Page
Loading...
Need help?
Power
Audio Characteristics
Weight and Dimensions
