EasyManuals Logo
Home>JVC>Car Receiver>KD-DV4200 - DVD Player With Radio

JVC KD-DV4200 - DVD Player With Radio User Manual

JVC KD-DV4200 - DVD Player With Radio
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
32
Troubleshooting
Something that appears to be a problem may not always be serious. Check the following
points before calling a service center.
Problem Causes/Remedies
General
Sound cannot be heard from
the speakers.
Volume level is set to the minimum level.
= Adjust it to the optimum level.
Connections are incorrect.
= Check the cords and connections.
This unit does not work at all. The built-in microcomputer may have functioned
incorrectly due to noise, etc.
= Reset unit.
FM/AM
FM stations cannot be preset
automatically.
Signals are too weak.
= Store stations manually.
Static noise while listening to
the radio.
Antenna is not connected rmly.
= Connect antenna rmly.
Disc playback
REGION CODE ERROR !
appears on monitor.
Region code of the DVD is not 1.
= Inset DVD whose region code includes 1.
DRIVER MUST NOT WATCH
THE MONITOR WHILE
DRIVING. appears on monitor.
Parking brake is not engaged.
= Stop driving and engage parking brake.
Disc cannot be played back. Disc is inserted upside down.
= Insert disc correctly.
Recordable/Rewritable discs
cannot be played back.
Disc is not nalized.
= Insert nalized disc.
= Finalize disc with the component which you used for
recording.
Tracks on the Recordable/Rewritable
discs cannot be skipped.
Disc cannot be recognized. The DVD/CD player may have functioned incorrectly.
= Eject the disc forcibly.
NO DISC appears on the
display.
Disc is inserted incorrectly.
= Insert disc correctly.
Sound and picture are
sometimes interrupted or
distorted.
You are driving on rough roads.
= Stop playback while driving on rough roads.
Disc is scratched.
= Change the disc.
No playback picture (DVD,
VCD) appears on monitor.
Parking brake wire is not connected properly.
= Refer to Installation/Connection Manual.
No picture appears on
monitor at all.
Video cord is not connected correctly.
= Connect video cord correctly.
Incorrect input has been selected on monitor.
= Select correct input on monitor.
The left and right edges of
the picture are missing on the
screen.
4:3 PAN SCANis selected when viewing on conventional
monitor (aspect ratio 4:3).
= Select 4:3 LETTER BOX.(P.29)
EN_KD-DV4200[J]_f.indd 32EN_KD-DV4200[J]_f.indd 32 12/16/05 1:02:33 PM12/16/05 1:02:33 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-DV4200 - DVD Player With Radio and is the answer not in the manual?

JVC KD-DV4200 - DVD Player With Radio Specifications

General IconGeneral
BrandJVC
ModelKD-DV4200 - DVD Player With Radio
CategoryCar Receiver
LanguageEnglish

Related product manuals