JVC MX-JE3 User Manual

(No.MB385)1-37
4. Change AM frequency step 9kHz/10kHz (Toggle)
6. System micon cold start
This unit returns to initial setting.
Setting of AM frequency is completed.
Press the STANDBY/ON button while
pressing the STOP button on the main
unit at standby.
AM ##
FL indication
## : 9K or 10K
AM frequency changes by the same operation again.
5. Tray LOCK/UNLOCK (Toggle)
Setting of tray LOCK/UNLOCK is completed.
Press the OPEN/CLOSE button while
pressing the STOP button on the main
unit at standby.
XXXXX
FL indication
XXXXX : LOCKED or UNLOCKED
Setting of LOCK/UNLOCK changes by the same operation again.
Insert the power cord in an outlet while
pressing the CANCEL and buttons
on the main unit.
7. System micon soft reset
System micon is initialized.
Press the STANDBY/ON button while
pressing the CANCEL and PAUSE
buttons on the main unit at standby.
8. Setting of DVD NTSC mode
Setting of DVD NTSC mode is completed.
Insert the power cord in an outlet while
pressing the SET and buttons on
the main unit.
Press the STANDBY/ON button
on the main unit at standby.
This setting is maintained after having been cut off.

JVC MX-JE3 Specifications

General

Brand	JVC
Model	MX-JE3
Category	Speaker System
Language	English