To Next Page

To Previous Page

Before operating external components from the remote

control, set the manufacturer’s code.

1 Set the remote control mode (see above).

2 Press and hold for the target component

until the setting is finished.

Enter the manufacturer’s code.

See “Manufacturer’s code list” for the

manufacturer’s code. ( 30)

5 Release .

If there is more than one code listed

for the corresponding brand, try each one until you

enter the correct one.

Set the codes after replacing batteries of the remote

control.

Set the remote control mode before operating each

external component (see the left column).

Operating the TV

Operating the DBS tuner or CATV

converter

Operating the VCR

Setting the manufacturer’s code

For TV For DBS tuner or

CATV converter

For VCR

Set the remote control mode before

operation.

For TV

For DBS tuner or CATV converter

For VCR

Preparation

Make the audio input setting before

operation. ( 14)

«Hold

Operating external components

Turns the power on and off

TV VOL +/– Adjusts the volume

TV/VIDEO Selects the input mode (either

TV or VIDEO)

CH +/– Changes the channels

1-10, 0, h10 (100+) Selects the channels

TV RETURN Alternates between the

previously selected channel

and the current channel

VCR/DBS

Turns the power on and off

CH +/– Changes the channels

1-10, 0, h10 (100+) Selects the channels

VCR/DBS

Turns the power on and off

3 (play button) Starts playback

7 Stops playback

8 Pauses playback

y Fast-forwards the tape

1 Rewinds the tape

REC Press this button together with 3

(play button) to start recording or

together with 8 to enter recording-

pause.

CH +/– Changes the TV channels

0 - 9 Selects the TV channels

Operating external components

TH-D6D5D4[JC]EN.book Page 29 Friday, February 23, 2007 7:47 PM

Questions and Answers:

Need help?

Do you have a question about the JVC TH-D5 and is the answer not in the manual?

JVC TH-D5 Specifications

General

Equalizer	Yes
RMS rated power	810 W
Audio output channels	5.0 channels
Center speaker RMS power	130 W
Optical disc player type	DVD player
Weight	6800 g
Dimensions (WxDxH)	435 x 115 x 270 mm
Power requirements	AC 230V, 50Hz
Remote control type	Multi-Brand Remote
Media types supported	DVD-Audio, DVD-Video, DVD-RW, DVD-R (VR/Video), +RW/+R (Video), CD / CD-R/RW, SVCD / VCD; MP3, WMA, WAV (CD-R/RW, DVD-R/RW, USB), JPEG Digital Still, MPEG-1/MPEG-2, MPEG-4, DivX(R)
Surround speaker weight	850 g
Surround speaker dimensions (WxHxD)	98.5 x 214.5 x 93.5 mm
USB version	2.0
SCART ports quantity	2
Power consumption (standby)	1 W
Power consumption (typical)	160 W