EasyManuals Logo
Home>JVC>Security Camera>VN-T216

JVC VN-T216 User Manual

JVC VN-T216
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
12
Connecting the Power Wiring
Connect the power supply cable to the power connectors.
Caution
If using a DC supply, make sure the polarity is correct.
Incorrect connection may cause malfunction and / or
damage to the camera.
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum Class
of wiring to be used. Class 2 shall be marked adjacent
to the field wiring terminals
Select one of the following options.
For DC12V
Connect 12 V (-) to terminal =DC12V-
Connect 12 V (+) to terminal =DC12V+
For AC24V
Connect 24 V (~) cables to terminals ~AC24V.
PoE
Connect the network cable to the RJ45 terminal using a switch.
Adjusting the Camera Position
The dome camera has three axes for positioning the camera. While monitoring the
picture on the monitor, adjust the camera position as follows:
Pan Adjustment (A) For Wall Mount and Tilted Ceilings: Rotate the lens base
(maximum 360°) until you are satisfied with the field of view.
Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn
assembly more than 360°as this assembly may cause the internal cables to
twist and disconnect or break.
Tilt Adjustment (C) After loosening the thumbnuts, position the camera as
desired, then finger tighten the thumbnuts to set the position.
Caution
Do not turn the lens more than 360° as this may cause internal
cables to disconnect or break.

Other manuals for JVC VN-T216

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC VN-T216 and is the answer not in the manual?

JVC VN-T216 Specifications

General IconGeneral
BrandJVC
ModelVN-T216
CategorySecurity Camera
LanguageEnglish

Related product manuals