45
Https is performed for setting or getting parameters, not for
video/audio stream.
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and options
as defaults.
FTP Server
In this page, you can activate a FTP Server to visit SD card for SD recording result.
Click “ON” to activate the FTP function. Then you should follow the following
procedures to set up related settings. Or “OFF” to disable the FTP function and
you can skip the following procedures.
Enter a login ID if you activate the FTP function.
Enter a password associated with a login ID.
Re-enter the password to confirm it.
Determine the number of maximum connections by selecting a number from
the drop-down list in the Max Simultaneous Connections field. Note: This parameter
is the max of FTP Client connections, not the max of IE Window’s connections.
Enter ftp://<Login ID>:<Password>@<ip-address> in Windows Explorer, then you will find
the SD recording result.
The original setting is ftp://admin:jvc@192.168.0.2 When you’re visiting the SD recording
files, date and time of record refers to the folder’s and file’s name.
Figure 4-31 FTP Sever Settings
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and options
as defaults.
To Next Page
Loading...
Need help?
General
