2260B Series User Manual
126
^j can be used as the terminal character when
entering the queries/commands from a
terminal application.
For further details, please see the programming
manual.
Web Server Remote Control Function Check
Enter the IP address of the power supply in a
web browser after the instrument has been
configured as a web server (page 123).
http:// XXX.XXX.XXX.XXX
The web browser interface appears.
For further details, please see the programming
manual.
Socket Server Function Check
To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available
on the NI website, www.ni.com., via a search
for the VISA Run-time Engine page, or
“downloads” at the following URL,
http://www.ni.com/visa/
Firmware: V1.12
Operating System: Windows XP, 7
1. Start the NI Measurement and Automation
Explorer (MAX) program. Using Windows,
To Next Page
Loading...
Need help?
General
