Keithley 2260B-80-13 User Manual

OPERATION
43
Basic Operation
This section describes the basic operations required to operate the
power supply.
 Setting OVP/OCP → from page 43
 CV mode → from page 45
 CC mode → from page 48
 Display modes → page 51
 Panel lock → page 52
 Remote sensing → from page 53
Before operating the power supply, please see the Getting Started
chapter, page 7.
Setting OVP/OCP Levels
The OVP level has a selectable range of 10% to
110% of the rated output voltage. The OCP
level has a selectable range 10%~ 110% of the
rated output current, alternatively the OCP
level can also be turned off. The OVP and OCP
level is set to 110% by default.
When one of the protection measures are on,
ALM is shown on the panel display. By default,
the power switch will turn off when any of the
protection levels are tripped.
ALM
V
A

Keithley 2260B-80-13 Specifications

General

Brand	Keithley
Model	2260B-80-13
Category	Power Supply
Language	English