Keithley 2302 User Manual

Model 2302 Specifics F-3
Calibration
When performing a front panel calibration on the Model 2302 and 2302-PJ (Section 14),
perform steps 1, 2, and 4, i.e., skip step 3: Perform Channel #2 (charger channel) calibration
steps. Also, the Model 2302 and 2302-PJ Cal Code is: KI002302
When performing a remote calibration on the Model 2302 and 2302-PJ (Section 14), calibrate
CH
AN1 only. Make modifications as required to Program D-1 Model 2306 calibration program
(Appendix D) to account for one channel.
Figure F-1
Model 2302 and 2302-PJ single channel battery simulator
WARNING:NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
CAUTION:FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
MADE IN
U.S.A.
LINE RATING
100-120VAC, 200-240VAC
50, 60 HZ 150VA MAX.
LINE FUSE
SLOWBLOW
2.0A, 250V
IEEE-488
(ENTER IEEE ADDRESS
FROM FRONT PANEL MENU)
REMOTE
DISPLAY
OPTION
+++
____
+
SOURCE SENSE
DVM IN
SOURCE
OUTPUT
A) Front Panel
B) Rear Panel
ISOLATION FROM EARTH:
22 VOLTS MAX.
RELAY
CONTROL
24VDC MAX.
POWER
DISPLAY
OPERATE
ENTER
SET
MENU
LOCAL
2302 BATTERY SIMULATOR
DVM IN
+30 VDC MAX.
CAT
I
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

Keithley 2302 Specifications

General

Brand	Keithley
Model	2302
Category	Power Supply
Language	English