To Next Page

To Previous Page

12-2 SCPI Tables

SCPI command subsystems reference tables

Tables 12-1 to 12-8 summarize the commands for each SCPI subsystem. The following list

includes the table numbers and page numbers for each SCPI subsystem command summary.

Table TitlePage

12-1 DISPlay command summary............................................ 12-3

12-2 FORMat command summary............................................12-4

12-3 OUTPut command summary.............................................12-5

12-4 SENSe command summary...............................................12-6

12-5 SOURce command summary..........................................12-16

12-6 STATus command summary............................................12-17

12-7 SYSTem command summary..........................................12-19

12-8 Model 2306-VS external trigger command summary.....12-20

General notes

• Brackets ([ ]) are used to denote optional character sets. These optional characters do not

have to be included in the program message. Do not use brackets in the program message.

• Angle brackets (<>) are used to indicate parameter type. Do not use angle brackets in the

progra

m message.

• SCPI — A checkmark (✓) indicates that the

command and its parameters are SCPI

confirmed. An unmarked command indicates that it is a SCPI command but does not

conform to the SCPI standard set of commands. It is not a recognized command by the

SCPI consortium. SCPI confirmed commands that use one or more non-SCPI parameters

are explained by notes.

• Refer to Section 7 for GPIB operation.

• Refer to Section 9 for common commands.

• Refer to table title for more command information.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Keithley 2302 User Manual

Other manuals for Keithley 2302