To Next Page

To Previous Page

DAQ6510

Data Acquisition / Multimeter System User's Manual Section 1:

Introduction

DAQ6510-900-01Rev. A / April 2018 1-3

Application examples

This manual provides application examples that show you how to perform tests from the front panel

and over a remote interface. The applications include:

• Making basic front-panel measurements: (on page 4-1

) Shows the basic measure functionality

using a single DAQ6510 and a two-terminal device under test.

• Making basic scans: (on page 4-1) Shows the basic measure scan functionality using a single

DAQ6510.

• Scanning temperature using thermocouples: (on page 5-1) Shows how to use the DAQ6510 to

log thermocouple-based temperature measurement scans.

• Scanning low-level DCV: (on page 6-1) Shows how to use the DAQ6510 to accurately measure

DC voltage in a variety of ranges

• Scanning resistors using 4W measurement: (on page 7-1) Shows how to use the DAQ6510 to

accurately measure resistance devices

• Mixed function multi-channel scanning: (on page 8-1) Shows how to use the DAQ6510 to perform

complex multi-channel, mixed function scanning in a production-test environment.

• Speed scanning for increased production test throughput: (on page 9-1) Shows how selecting the

right multiplexer module can increase your productivity by reducing overall test time.

• Pre-scan monitoring: (on page 10-3) Shows how to configure the DAQ6510 to delay its scanning

function until the testing environment has reached a specific temperature.

Keithley DAQ6510 User Manual

Other manuals for Keithley DAQ6510